Star SM-T300 Portable Printer Setup

The following are simplified instructions for connecting the printer to your network.

We suggest you download and read the official manual from POS-X, available here.


Step 1: Unpack all the parts and connect the battery.

star-sm-t300-battery


Step 2: Connect the belt clip.

Use a small coin or screwdriver to secure the belt clip to the printer.


star-sm-t300-belt-clip



Step 3: Load the paper roll.

This is an excerpt from the user’s manual:

star-sm-t300-insert-paper-roll

Step 3: If necessary, charge the battery:

1- While charging the printer, turn off the printer power.

2- Do not remove the battery during charging.

3- If the printer is not used for a long time, unplug the power cord from the printer and outlet.

4- You must use the supplied or optional battery charger.

5- Red Lamp: charging the battery.
    Green Lamp: charging is finished.

6- A drained battery may take 4 to 5 hours to recharge.

7- Open the COMM DC panel on the left side of the printer and connect the adapter.

star-sm-t300-charge-battery

Step 4: Turn on the printer and connect via bluetooth with your device.

The power switch is located on the face of the printer (to the left of the LCD display). Hold the power button for 5 seconds to power it on or off.



Step 5: Call us if help is needed.

Call our tech support at (888) 265-4767 if you need help pairing the printer with your device.