Brecknell 6720 Scale

Step 1: Connect the scale to the POS-X.

A – Connect the RS232 cable to the “RS232” jack in the back of the scale.

B – Connect the other end of the RS232 cable to the serial adapter.

C – Connect the serial adapter to an open COM port in the POS-X connection panel.

      Be sure NOT to connect the adapter to either the COM4 12v port or the LAN port, these are used for other devices!


brecknell-6720-to-posx-cable

Step 3: Connect the power

D – Make sure the the power adapter is connected to the DC power jack in the back of the scale, then plug the scale into an available power outlet.

brecknell-6720-power

Step 4: Call us

E – Call our tech support at (888) 265-4767, we’ll guide you through the final setup stage.